Welcome to Viewpro UAV Shopping Mall!

My Wishlist 0 item(s)

Price: US$899.90
Specifications
Hardware specification
Processor SoC – Pinecone S1
AP: 4 x large core, Cortex A53, 2.2GHz
4 x small core, Cortex A53, 1.4GHz
GPU: 4 core, Mali-T860
SDR: A7 + DSP
Storage Air Unit LPDDR3 1GB
Controller LPDDR3 2GB
Air Unit/Controller EMMC 4GB
Transmission Range FCC 20km CE/SRRC 12km
Latency Min 110ms
Resolution 720p@30fps, 1080p@30/60fps
Frequency Band 2.4GHz ISM
Receive sensitivity -99dBm@20MHz BW
Interference recovery < 1s
Air Unit
Housing Aluminum
Weight 95g (w. antennas)
Dimension 78.5x30x15mm (w/o antennas)
Signal Bandwidth 20MHz/10MHz
Power Consumption < 4W
HDMI 1 Micro HDMI, for video input (preferred)
HDMI 2 Micro HDMI, for video input
Power Recommended supply voltage ~7V, minimum 6V, maximum 12V and avoid sharing BEC with servos
Micro USB For debug or upgrade, support OTG
Pair/Reset For pairing and reset
LED 1, 2 To indicate pairing status and transmission status
UART 3.3V / 5V UART
S.bus Two 3.3V RC output
ANT 1, 2 MMCX, for signal transmission and communication
Controller
Housing Plastic
Weight 516g (w. antennas)
Dimension 217×106.5x31mm (w/o antennas, joysticks )
Screen 5.46 inch, 1080P, 16 million colors,
capacitive touch screen
Audio 1 x built-in speaker, 2 x built-in microphone
Remote control 2 x joystick, 1 x wheel,
6 x button (w. blacklight), 1 x upper right button
Communication WIFI/GPS 2.4GHz on the controller side
LED 2 x tricolor LED (left, right)
Interface 1 x MicroUSB, 1 x Micro SD card slot
(extendable to max. 64GB)
Antenna 1 x detachable directional (5dBi),
1 x detachable omni-directional (2dBi),
built-in WIFI antenna, built-in GPS antenna,
external GPS antenna interface
Power 4950mAh built-in Lipo Battery
Charging Support micro USB 5V 2A charging
Power consumption < 4W average (With transmission on, medium screen brightness, WIFI off, GPS off)
VS