Welcome to Viewpro UAV Shopping Mall!

My Wishlist 0 item(s)

Price: US$12,999.00
Specifications
Hardware Parameter
Working voltage 12V
Input voltage 3S ~ 6S
Output voltage 5V (connect with PWM)
Dynamic current 1350~2000mA @ 12V
Idle current 1350mA @ 12V
Working environment temp. -20℃ ~ +60℃
Output micro HDMI(1080P 25fps/30fps/50fps/60fps) / IP (720p/1080p  25fps/30fps) / SDI (1080P 30fps)
Local-storage TF card (Up to 128G, class 10, FAT32 or ex FAT format)
Photo storage format JPG(1920*1080)
Video storage format MP4  (1080P/720P 25fps/30fps)
Control method PWM  / TTL / S.BUS / TCP(IP output)
Gimbal Spec
Angle range of structure design Pitch/Tilt:-60°~135°,   Roll: ±40°,    Yaw/Pan: ±300° / ±360°*N (IP / SDI output version)
Angle range of software design Pitch/Tilt: -45°~90°,   Yaw/Pan: ±290° / ±360°*N (IP / SDI output version)
Vibration angle Pitch/Roll: ±0.02°, Yaw:±0.02°
One-key to center
EO Camera spec
Imager Sensor 1/1.8 Type STARVIS CMOS Sensor
Picture quality 4170K pixels
Lens optical zoom 30x, f=6.5~162.5mm,F1.6 to F4.8
Digital zoom 12x (max. 432x with StableZoom)
Min object distance 100 mm (Wide end), 1200 mm (Tele end)
Horizontal viewing angle 58.1°(wide end) ~ 2.3°(tele end)
Sync system Internal
Image S/N 50 dB (Weight On)
Min illumination In the case of ICR-Off
(Typical value) 0.009 lx (1/30 sec, 50%, High Sensitivity mode On)
0.09 lx (1/30 sec, 50%, High Sensitivity mode Off)
0.0012 lx (1/4 sec, 1/3 sec, 50%, High Sensitivity mode On)
0.012 lx (1/4 sec, 1/3 sec, 50%, High Sensitivity mode Off)
In the case of ICR-On
0.00008 lx (1/30 sec, 50%, High Sensitivity mode On)
0.00063 lx (1/30 sec, 50%, High Sensitivity mode Off)
0.000005 lx (1/4 sec, 1/3 sec, 30%, High Sensitivity mode On)
High Sensitivity mode On/Off Off
Recommended illumination 100 lx to 100,000 lx
Gain Auto/Manual (0 to 50.0 dB (0 to 28 step))
Max. Gain Limit (10.7 to 50.0 dB (6 to 28 step))
White balance Auto, ATW, Indoor, Outdoor, One Push WB, Manual WB, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto)
Wide Dynamic Range Mode On/Off
Shutter speed 1/1 sec to 1/10000 sec (22 steps)
Backlight compensation On/Off Off
Image Stabilizer On/Off/Hold Off
ICR On/Off Off
Aperture control 16 steps
Noise Reduction On/Off (level 5 to 1 / Off, 6 steps)
Defog On/Off (low, mid, high)
OSD Yes
IR Thermal Imager Spec
Focus Length 50mm
Horizontal FOV 17.5°
Vertical FOV 14°
Diagonal FOV 22.3°
Detective Distance (Man: 1.8×0.5m) 2083 meters
Recognize Distance (Man: 1.8×0.5m) 521 meters
Verified Distance (Man: 1.8×0.5m) 260 meters
Detective Distance (Car: 4.2×1.8m) 6389 meters
Recognize Distance (Car: 4.2×1.8m) 1597 meters
Verified Distance (Car: 4.2×1.8m) 799 meters
Working mode Uncooled long wave (8μm~14μm) thermal imager
Detector pixel 1280*1024
Pixel pitch 12μm
Focusing method Athermal prime lens
Emissivity correction 0.01~1
NETD ≤50mK (@25℃)
MRTD ≤650mK (@characteristic frequency)
Image enhancement Auto adjust image brightness and contrast ratio
Color palette White, iron red, pseudo color
Auto Non-uniform correction Yes (no shutter)
Digital zoom 1x ~ 4x
Sync correct time Yes
Thermometry type Temperature bar (psudo color display) max temp, min temp, FOV center temp (Optional)
Temperature warning 0℃~120℃ (For thermometry version only)
EO/IR Camera Object Tracking
Update rate of deviation pixel 50Hz
Output delay of deviation pixel 5ms
Minimum object contrast 5%
SNR 4
Minimum object size 32*32 pixel
Maximum object size 128*128 pixel
Tracking speed ±48 pixel/frame
Object memory time 100 frames (4s)
The mean square root values of pulse noise in the object position < 0.5 pixel
Packing Information
N.W. 1570g(Viewport Version)
Product meas. 162.8*146*240.1mm / 162.8*146*245.8mm(Viewport Version)
Accessories 1pc gimbal camera device, screws,  copper cylinders, damping balls, damping boards, 1pc USB to TTL cable / Hight quality plastic box with foam cushion
Package meas. 350*300*250mm
VS

Select a product to compare: