Welcome to Viewpro UAV Shopping Mall!
Police drones
Smoke bomb tear gas launcher
Anti-terrorism and anti-riot
tactical cooperation
stability maintenance weapon
Counter-terrorism / combat / cover /
evacuation / marking / signal
The basic use of smoke bombs and tear gas bombs is to create visual obstacles to the enemy, which is very helpful for
attacking the enemy or defending:
Sometimes human throws cannot accurately reach the target
area in many special environments;
The UAV smoke bomb and tear gas launcher developed and produced by our company can easily perform and complete the task.
UAV can control the overall situation and accurately launch
targets from a high altitude to perform tasks, thereby bringing psychological fear and obstacles to the enemy's line of sight.
Product Advantages:
Small volume, light weight, very large bullet capacity.
Quick detachable design
loading and unloading takes
only three minutes
lmprove task efficiency
Military industry-level quality
POM Steel, Aviation
Aluminum, Carbon fiber,
stainless steel material
Large bullet capacity
Eight-hole position bullet warehouse design
A single mission lasts longer
Product details
Safety box x 1's
Transmitter x 1 desk
Six access to remote control x 1's
Transmitter | |
Overall dimension: | 220*135*260mm |
Outer packing box: | 473*348*185mm |
Net weight: | 3.85 KG |
Material: | POM racing steel, aviation aluminum, carbon fiber, atainless steel material |
lnatallation method: | quick disassembly type |
Tranamission mode: | Electric excitation |
Diameter: | 38 mm |
Loading capacity: | 8 account |
Power supply mode: | The airborne power supply |
Operating voltage: | DC 12-28V |
Control mode: | independent remote control of PWM signal |
Control distance: | 800M |
Control Angle: | The pitch shaft is 360 degrees |
Expansion Channel: | MGOD is enabled (contact Sales first) |
Applicable models: | MGOD Pro and the wind series |
(other independent models, please contact sales first) | |
Camera: | active |
pixels: | PAL.976 (H)494 (V) |
NTSC: | 768 (H) *494 (M) |
Remote control | |
Overall dimension: | 180*82* 161mm |
Weight: | 392 gram |
lnput the power supply: | 6V 1.5AA*4 |
Data output: | PS2 interface PPM |
Frequency range: | 2.4055-2.475GHZ |
Band width: | 500KHZ |
Transmitter power: | Not higher than 20dBm |
Low-voltage alarm: | Below 4.2V |
Charging interface: | No |
Antenna length: | 26 mm * 2 (dual antenna) |
Display mode: | STN semi-transparent positive display,128x64 dot array VA73*39 mm LED white backlight |
Transmitter | |
Overall dimension: | 220*135*260mm |
Outer packing box: | 473*348*185mm |
Net weight: | 3.85 KG |
Material: | POM racing steel, aviation aluminum, carbon fiber, atainless steel material |
lnatallation method: | quick disassembly type |
Tranamission mode: | Electric excitation |
Diameter: | 38 mm |
Loading capacity: | 8 account |
Power supply mode: | The airborne power supply |
Operating voltage: | DC 12-28V |
Control mode: | independent remote control of PWM signal |
Control distance: | 800M |
Control Angle: | The pitch shaft is 360 degrees |
Expansion Channel: | MGOD is enabled (contact Sales first) |
Applicable models: | MGOD Pro and the wind series |
(other independent models, please contact sales first) | |
Camera: | active |
pixels: | PAL.976 (H)494 (V) |
NTSC: | 768 (H) *494 (M) |
Remote control | |
Overall dimension: | 180*82* 161mm |
Weight: | 392 gram |
lnput the power supply: | 6V 1.5AA*4 |
Data output: | PS2 interface PPM |
Frequency range: | 2.4055-2.475GHZ |
Band width: | 500KHZ |
Transmitter power: | Not higher than 20dBm |
Low-voltage alarm: | Below 4.2V |
Charging interface: | No |
Antenna length: | 26 mm * 2 (dual antenna) |
Display mode: | STN semi-transparent positive display,128×64 dot array VA73*39 mm LED white backlight |