Welcome to Viewpro UAV Shopping Mall!
Welcome to Viewpro UAV Shopping Mall!
CAN PMU is a drone power management unit with a built-in STM32F4 processor and running the CUAV ITT algorithm.lt can accurately measure the drone voltage and current in real time.lt supports a maximum of 6-62V voltage and 110A current and can output 5.4V 5A.(Maximum instantaneous 8A / 120s,constant 5A) Powers the flight controller, uses CAN bus communication, supports standard UAV CAN protocol, and each PMU unit is factory calibrated to ensure good consistency and high accuracy.
CAN PMU uses the self-developed lTT impedance temperature tracking algorithm to make up for measurement errors caused by impedance changes at different operating temperatures, enabling CAN PMU to maintain consistent high-precision voltage and current measurements at various operating temperatures.
CAN PMU adopts standard UAVCAN digital communication protocol.All information is transmitted digitally to avoid error problems caused by traditional ADCs that are easily susceptible to attenuation and interference.
lnternally through real-time sampling of more than 100HZ and real-time statistics of power consumption / instantaneous power consumption, pass accurate power consumption information to the flight controller to achieve a safer and controllable flight
Built-in voltage regulator uses LT8645S chip, supports 62V input,5.4V/5A*synchronous step-down voltage regulator,has ultra-low EMl and EMC, up to 95% conversion efficiency, meets the industry drone flight control peripherals, and power consumption Big application needs
Thermal imaging tests at room temperature show that the 90A(24V) case temperature for only 3 hours of operation is only 78 degrees Celsius.
| Processor | STM32F412 10OMhz 512K Flash 256K RAM |
| Voltage input | 6-62V(2-15S) |
| Max current | 11OA |
| Voltage accuracy | ±O.O5V |
| current accuracy | ±0.1A |
| Resolution | 0.01A/V |
| Max output power | 6000w/90s |
| Max stable power | 5000w |
| Power port output | 5.4V/5A |
| Protocol | UAVCAN |
| Operating temp | -20°℃~+100℃ |
| Firmware upgrade | support |
| calibration | No need |
| lnterface Type | |
| IN/OUT | XT9O(Cable end)/Amass 8.O(Module end) |
| Power | 5O25850670 |
| CAN | GHR-O4V-S |
| Appearance | |
| Size | 46.5mm×38.5mm×22.5mm |
| weight | 76g |
| Processor | STM32F412 10OMhz 512K Flash 256K RAM |
| Voltage input | 6-62V(2-15S) |
| Max current | 11OA |
| Voltage accuracy | ±O.O5V |
| current accuracy | ±0.1A |
| Resolution | 0.01A/V |
| Max output power | 6000w/90s |
| Max stable power | 5000w |
| Power port output | 5.4V/5A |
| Protocol | UAVCAN |
| Operating temp | -20°℃~+100℃ |
| Firmware upgrade | support |
| calibration | No need |
| lnterface Type | |
| IN/OUT | XT9O(Cable end)/Amass 8.O(Module end) |
| Power | 5O25850670 |
| CAN | GHR-O4V-S |
| Appearance | |
| Size | 46.5mm×38.5mm×22.5mm |
| weight | 76g |
